Application
Built for hi-performance Pro street vehicles, Street rods, and limited racing.
No TV cable or Governor is required.
No vacuum lines or kick-down components are required.
Full manual valve body - Forward Shift pattern only.
Complete unit comes with detailed installation and wiring instructions.
(When converting from any automatic transmission w/ computer control the computer from a stick-shift trans must be used)
http://www.fbperformance.com/page.asp?get=22&t=Top2
Features
-
Forward Shift Pattern only
-
Quick Shift Operation
-
No "Engine Braking" in 1st and 2nd Gear
-
Trans-brake (optional) permits Max stall speed and has Instant release for full tree
-
Hi-Capacity Filter
-
Improved Oil Circulation
-
Maximum Torque and Thrust Capacity
-
Reverse Safety Feature is included for Trans-Brake
-
Overdrive and optional Trans-brake functions are electrically activated.
Competition Components
-
Modified Front Pump Assembly w/Teflon Rings
-
Large Servo Assembly
-
Competition Hi-flow Manual Valve-body & High Pressure Regulator
-
Hi Performance Clutch Packs & High Energy Band
-
Heavy Duty Intermediate Mech. Diode Assembly
-
300M Input Shaft
-
(Optional) Internal Transbrake with electric activation
Options
| -YK1 | H.D. Billet C-4 Yoke | $172.50 | $201.25 |
| -HHP5 | High HP Modification - Oversized 300M Direct Drum Assy | $833.75 | $980.95 |
| -DP | Deep (alum.) Pan & Filter extension | $219.65 | $258.75 |
| -LB | Shift Lever & Bracket Kit (for Aftermarket Shifters) | $143.75 | $171.35 |
| -DS | Dip Stick & Tube (cadmium plated w/ locking top - specify engine) | $79.35 | $93.15 |
| -FP | 164th Flexplate (specify engine balance, 0, 28 or 50oz.) | $143.75 | $158.70 |
| -GS | HD Wide Ratio Gear Set (2.84/1.56/1.00/0.70) | $687.70 | $808.45 |
| -VSC | Variable Stall Control | $1,189.10 | $1,399.55 |
| -CK | Cross-member Adapter Kit (Early Mustang 65-73) | $209.30 | $246.10 |
| -TB | Trans-brake feature added to full manual valve body | $241.50 | $282.90 |
| -CN | AOD to 4STB conversion - 4WD | $113.85 | $133.40 |
| -TS | Transmission Shield - installed | $269.10 | $317.40 |
| FS | Flexplate shield | $171.35 | $177.10 |
| -BL1 | SFI Bellhousing & Mod. Fnt Pump installed for BB, SB & MOD motor | $520.95 | $611.80 |
| -FPS | SFI 164 tooth Flexplate (specify balance-0, 28 or 50)...(specify 6 or 8 bolt hole crankshaft) | $269.10 | $317.40 |
| -YK2 | H.D. Billet yoke (large O.D.) | $201.25 | $230.00 |
| -RC | Overdrive Relay controller w/Auto Reset & Momentary PB switch | $172.50 | $204.70 |
| -HHP1 | Higher HP Internal Valvebody Modifications (for up to 1200 hp) | $353.05 | $415.15 |
| -CL | Cooler & Line Kit | $434.70 | $511.75 |
| -HHP3 | High HP Modification - 300M Direct Drum Assy | $591.10 | $695.75 |
Pricing
| SS12104-S-00 |
4STB (non-lock-up) Ford (small block)
Core Charge:
$218.00
| $2,888.50 | $3,199.15 |
Order Notes
Fill out the "Converter Application Form" to determine correct converter size &
stall rpm. All transmissions with converters and related equipment will ship by
Freight in a special container.
Converters
| 10" | Street Strip | 2400 - 3800 RPMs | 650 | 575 | $951.05 | $1,117.80 |
| 9" | Full Race | 4000 - 6000 RPMs | 1000 | 900 | $1,189.10 | $1,399.55 |
| 10" | Full Race | 2800 - 5000 RPMs | 900 | 750 | $1,135.05 | $1,344.35 |
| 8" | Full Race | 3500 - 7000 RPMs | 1000 | 900 | $1,283.40 | $1,337.45 |
| 9" | Extreme Duty..(Turbo/Super Appl) | 3000 - 6000 RPMs | 1500 | 1200 | $1,550.20 | $1,823.90 |
| 8" | Extreme Duty | 3500 - 7000 RPMs | 1200 | 1000 | $1,375.40 | $1,618.05 |
What kind of transmission fluid should I use?
For Street and Street/Strip applications we only recommend the use of Ford type "F" Transmission fluid. For Extreme Duty applications we only recommend the use of ULX-110 type fluid. Both of these fluids are natural Petrolium based. Both of these fluids contain zinc which is the primary additive for proper lubrication for high performance transmissions. We do not recomend synthetic transmission fluids.
How much transmission fluid does my transmission take?
The transmission and torque convertor can take anywhere from 9 to 13 quarts of fluid. Most of the fluid is contained in the torque convertor. After installation of the transmission and convertor is complete, pour (4-5) quarts of transmission fluid into the transmission. Then place transmission into neutral, start engine, and quickly add transmission fluid until it reaches the full mark (pan rail level on most applications) on the dipstick. Shift transmission into reverse and let run approximately (3) minutes. Running in reverse (3) minutes will give any contaminants in the transmission, converter, cooler or lines a chance to settle into the transmission pan and not be introduced to the automatic shift control part of the valve body or governor, causing the shift valves to stick. For more details follow link. http://www.fbperformance.com/NewSite/page.asp?get=14&t=Bottom2
Why is the automatic transmission generally perfered over a stick shift transmission?
From a convenience stand point, most high performance automatic transmissions have the ability to be shifted manually or automatically. From an efficiency standpoint, today’s automatic transmissions incorporate a more efficient torque converter that is specifically built for each application. These torque converters have the ability to multiply the engines torque during the stall phase. A clutch on the other hand, simply is along for the ride by connecting the engines power to drive-line. All converters also have a built-in fluid dampening feature. For the higher horsepower applications the automatic transmission and converter combination is more often than not more durable and reliable than the clutch and standard gear box combination. We’ve found when doing conversions from stick to automatic in high performance vehicles that these cars generally drop from a half to three quarters of a second in elapsed time in the quarter mile.